PRODUCT DESCRIPTION


Roljack Stone Sawing Machine is mainly used for cutting granite and marble, and also can used for

cutting porcelain, concrete and other metallic material.

A) This machine adopts gantry structure, with reasonable structure and stable working

conditions. After adopting adjustable auxiliary guiding device, the carriage running steadily.

B) This machine can be used for cutting over 20mm thickness of granite and marble plate, various

specifications of platform, tombstone and material stone for arts and craft, Especially suitable

for cutting the stone whose height is less than 2300mm from one layer to another, which can

raise the ration of finished products and reduce the cost of production.

C) This machine can be equipped with big disc of 2800mm and also can be equipped with 3 Multi

Disc of big, middle and small. With wide vertical and cross stroke, this machine can be used in

processing stone block with large size.

D) This machine is easy to operate and safe to use depending on its interlocking and safety

devices in electric parts. The controlling system has two types of manual and automation.

According to different hardness of stone, the feeding sped can be adjusted.

E) This machine have a high automation after adopting PLC Controlling system. During the

cutting process, it can carry out vertical feed, which greatly improved the producing efficiency

and effective process length of equipment.

F) After adopting electric lubrication system in vertical rails, lead screw and carriage parts, it

carries on a very good lubrication results, keeps a precise processing and reduces daily

maintenance time.

In Consideration of safety, these series machine are equipped with abrasive limits protection

device for protecting vertical lead screw and protection device of cooling water flowage.




TECHNICAL SPECIFICATION & PARAMETERS


Parameters

2.0 Mtr.

2.5 Mtrs.

2.5 Mtrs.

3.0 Mtrs.

3.5 Mtrs.

Beam Length

18'

18'

20'

20'

22'

Blade Cross Movement

4000 mm

4000mm

4600mm

4700mm

5300mm

Blade Vertical Movement

2250mm

2250mm

2250mm

2400mm

2550mm

Blade Motor Power

30HP

40HP

40HP

50HP

60HP

Bridge Motor Power

3HP

3HP

3HP

5HP

5HP

Cross Travel Motor Power (D.C.)

3HP

3HP

3HP

5HP

5HP

Maximum Allowable blade dia

2000mm

2500mm

2500mm

3000mm

3500mm

Spindle Dia

150mm

150mm

150mm

150mm

180mm

Maximum Working with Ruph Block

9'6"

9'6"

11'0"

11'0'

12'6"

Width

6'0"

6'0"

6'0"

6'0"

6'3"

Height

6'0"

6'0"

6'0"

6'0"

6'6"

Maximum Working Output with Slab (mm)

825(2'9")

1050(3'5")

1050(3'4")

1260(4'1")

1475(4'10")

Flange

350mm

400mm

450mm

500mm

550mm

Working Table ( Trolley) Length

2450mm

2750mm

2750mm

2850mm

2900mm

Working Table (Trolley) Width

1220mm

1350mm

1350mm

1450mm

1525mm

Gross Weight of Machine Approx. (in

Kgs.)

11000

12000

12000

16000

18500

Standard Voltage & Frequency

415 Volts 3 p h 50 Hz

415 Volts 3 p h 50 Hz

415 Volts 3 p h 50 Hz

415 Volts 3 p h 50 Hz

415 Volts 3 p h 50 Hz

Maximum Permissible Step Cutting

Depends on Diamond Cutter, Their Quality and Block

Hardness

Depends on Diamond Cutter, Their Quality and Block

Hardness

Depends on Diamond Cutter, Their Quality and Block

Hardness

Depends on Diamond Cutter, Their Quality and Block

Hardness

Depends on Diamond Cutter, Their Quality and Block

Hardness

Trolley Type

45 Degree "V" Wheel motorized optional dual speed availabe

on request.

45 Degree "V" Wheel motorized optional dual speed availabe

on request.

45 Degree "V" Wheel motorized optional dual speed availabe

on request.

45 Degree "V" Wheel motorized optional dual speed availabe

on request.

45 Degree "V" Wheel motorized optional dual speed availabe

on request.



Note :

1. This Technical Date may be used for guideline of production.

2. Roljack reserve right to introduce any technical modification to its machines for improvement.

3. Therefore any Date given is only for indicative value.