Speaking of replica watches uk Jaeger-LeCoultre female table replica watches should be the most famous product family replica watches sale dating series, really beautiful, but most fascinated by my flip series rolex replica.

ROLJACK MACHINERY OUTPUT PRODUCTS.

The finished Product is 100% curical which is approved by Govt. & Semi Govt. Organization.

   

                                                                                                         

BODY : Heavy Steel Plates Welded Construction, Tremendously strong box beam design.


JAW PLATES : 

Fix jaw & moving jaw plates are maganize steel casting. Wide range of plates with different configurations are available and can be fitted quickly. Plates are fully machined to gives positive location and are retained by wedge profile deeper plates.


PITMAN : 

Pitman is always in compression and as such it is very light in design than any other conventional pitman. A long stroke eccentric and relatively flat toggles ensures great leverage coupled with low bearing pressure.


TOGGLES : 

Double toggle provides balance distribution of maximum load to eccentric shaft, pullback and lifter spring provides cushioning to the toggle mechanism which compensates for wear and tear.


HINGE PIN :

Is on center line of crushing chamber for direct crushing without rubbing. It is made up of alloy steel for long lasting. It is held in a MASSIVE SPLIT CLAMP to give a stiff, unyielding unit but it can be removed easily for overhaul. Liquid grease lubrication and large bearings ensures many years of trouble free life.


SWING JAW : 

It designed and balanced to avoid power losses through lifting on crushing stroke, for maximum crushing. Swing jaw & Fix Jaw both are casted in single piece. 


ECCENTRIC SHAFT : 

Is of alloy mounted in self aligned roller bearings of ample capacity for smooth running which enables load to be absorbed by the solid frame.


FLYWHEEL: 

Is of graded cast Iron which acts as Fly wheel cum Driving Pulley with the low Intertia of Mechanism.


LUBRICATION: 

Continues lubrication is provided with positive gear pump to toggle-Pitman mechanism, continuos oil flow enables the crusher to run at high speeds, Gear pump is mounted directly on crusher shaft.


SAFETY DEVICE: 

For accidental overloads crusher is equipped with a spring loaded safety device which disconnects the fly wheel from the main shaft if material of excessive crushing strength enters the crushing chamber. The device is easily adjustable after the chamber is cleared.


GANGSAW:

Quality of Plates used is very high, bearing quality is also very strong.

OIL SEAL: 

The flexible diaphragm permits free movement of toggles and swing jaw.


OIL CHAMBER: 

In case of failure of diaphragm oil flows in a separate gravity oil chamber, which prevents spilling of oil outside the crusher and saves the costly oil.


EASY ADJUSTMENT: 

Setting the jay opening is quick and easy with all adjustment carried on the stationary jaw. Correct Crushing Geometry is not disturbed at all.


BEARING:

Imported and standard makes bearing has been used in crusher.